Modeling Masks

1-17 of 17 Items

Products

Prosana Mask / Green Tea

Purpose: Suitable for all skin types, especially dry and environmentally damaged skin.



Open packet, unfold and lay mask on thoroughly cleansed face. Leave on face for 15 to 20 minutes. Remove mask and discard. Finish with a toner and moisturizer.





Open packet, unfold and lay mask on thoroughly cleansed face. Leave on face for 15 to 20 minutes. Remove mask and discard. Finish with a toner and moisturizer.

Price: $6.95

HM4550


Prosana Modeling Mask / Chamomile / 2.2lb

Purpose: 1. Mix 2 tablespoons of powder with tepid water.

2. Stir quickly and vigorously for 1 minute in a rubber-mixing bowl with a wooden applicator. Product will appear smooth like a frosting.

3. Product is time sensitive, apply the product immediately to the face covered with gauze, avoiding the eye area.

4. Allow mask to penetrate for 15 to 20 minutes.

5. Starting at the neck, begin peeling the mask towards the forehead. Remove any residue with a hot/moist towel in a soft circular motion.

6. Apply moisturizer.

Price: $59.95

H31060


Prosana Modeling Mask / Ginseng & Pearl / 2.2lb

Purpose: 1. Cleanse skin with appropriate cleanser for skin type. Rinse well with warm water.

2. Apply toner according to skin type.

3. Mix Ginseng & Pearl Modeling Mask with warm water to form a thick creamy paste. (4 Tablespoons of Mask powder with 3 Tablespoons warm water.)

4. Apply eye pads to eyes and gauze mask to face.

5. Spread Ginseng & Pearl Mask mixture evenly over the gauze mask in a thick layer. Avoid contact with eyes, nostrils, lips and hairline. Leave on 20 to 30 minutes.

6. After 20 to 30 minutes, remove mask. Mask will remove easily in one piece.

7. Use sponge to clean face with warm water to remove and mask residue.

8. Complete treatment by applying moisturizer according to skin type.

Price: $59.95

H31000


Prosana Modeling Mask / Bilberry

Purpose: 1. Lubricate the eyebrows and hairline with a moisturizer.

2. Combine 1 packet of Bilberry powder and 90 ml of water in a rubber mixing bowl using a wooden spatula.

3. Mix about 30 seconds until you get a frosting like consistency.

4. Apply a thick layer to the face and neck until covered.

5. Let penetrate for 10 minutes.

6. To remove, roll the mask from the neck and lift off as one piece.

7. Follow with moisturizer.

Price: $3.99

HM4501


Prosana Modeling Mask / Papaya

Purpose: 1.) Mix powder packet with 1/3 cup water. (Important: Make sure water is 68 degrees F.)

2.) Pour the water on the powder, stir quickly and vigorously for 1 minute to get a creamy, smooth paste.

3.) Apply the paste immediately to the face. The mask sets in 5 minutes following the application.

4.) Leave the mask to perform its function at least 15 minutes.

Price: $3.99

HM4502


Prosana Mask / Seawater & Alginate / 1.05oz

Purpose: 1. Combine 1 ounce (30 grams) of powder with 3 ounces (90 grams) of water. (Note the water should be 68 degrees F (20 degrees C).

2. Stir vigorously for one minute until you get a homogeneous paste.

3. Apply the paste immediately to the face, avoiding the area around the eyes. The mask should set within 5 minutes.

4. Leave the mask in place for at least 15 minutes.

5. Remove by peeling it off in one piece.

Price: $4.25

HM4525


Prosana Modeling Mask / Acne Cooling / 2.2lb

Purpose: 1. Cleanse skin with appropriate cleanser for skin type. Rinse well with warm water.

2. Apply toner according to skin type.

3. Mix Dong Kwai Modeling Mask Powder with warm water to form a thick creamy paste. (4 Tablespoons Mask powder with 3 Tablespoons of warm water)

4. Apply eye pads to eyes and gauze mask to face.

5. Spread Dong Kwai Mask mixture evenly over the gauze mask in a thick layer. Avoid contact with eyes, nostrils, lips, and hairline. Leave on 20 to 30 minutes.

6. After 20 to 30 minutes, remove mask. Mask will remove easily in one piece.

7. Use sponge to clean face with warm water to remove any mask residue.

8. Complete treatment by applying moisturizer according to skin type.

Price: $59.95

H31010


Prosana Modeling Mask / Dead Sea / 1.05oz

Purpose: Mix 3 oz. of water at 88 degrees Fahrenheit with 1 oz. of powder. Stir quickly for 1 minute to create a creamy paste. Apply immediately to the face. Leave mask on for at least 15 minutes. Remove mask by peeling off in one piece.

Price: $4.75

HM4521


Prosana Modeling Mask / Lightening / 2.2lb

Purpose: 1. Cleanse skin with appropriate cleanser for skin type. Rinse well with warm water.

2. Apply toner according to skin type.

3. Mix Lightening Modeling Mask Powder with warm water to form a thick creamy paste. (4 Tablespoons Mask powder with 3 Tablespoons warm water)

4. Apply eye pads to eyes and gauze mask to face.

5. Spread Lightening Modeling Mask mixture evenly over the gauze mask in a thick layer. Avoid contact with eyes, nostrils, lips and hairline. Leave on 20-30 minutes.

6. After 20-30 minutes, remove mask. Mask will remove easily in one piece.

7. Use sponge to clean face with warm water to remove any mask residue.

8. Complete treatment by applying moisturizer according to skin type.

Price: $59.95

H31040


Prosana Mask / Ginseng Spirulina / 1.05oz

Purpose: 1. Combine 1 ounce (30 grams) of powder with 3 ounces (90 grams) of water. (Note the water should be 68 degrees F (20 degrees C).

2. Stir vigorously for one minute until you get a homogeneous paste.

3. Apply the paste immediately to the face, avoiding the area around the eyes. The mask should set within 5 minutes.

4. Leave the mask in place for at least 15 minutes.

5. Remove by peeling it off in one piece.

Price: $4.75

HM4526


Prosana Mask / Hibiscus and Arnica / 1.05oz

Purpose: 1. Combine 1 ounce (30 grams) of powder with 1 ounce (30 grams) of water.

2. Stir it until you get a smooth paste.

3. Apply the paste immediately to the face, avoiding the area around the eyes.

4. Leave the mask in place for at least 15 minutes.

5. Remove the mask with water and a sponge.

Price: $3.99

HM4528


Prosana Mask / Olive Oil & Leaf / .35oz

Purpose: Mix 90 ml. (approximately 3 oz.) of water (at 88°F) to 30 g. (approximately 1 oz) of powder. Stir quickly for one minute to create a creamy paste. Protect eyes with cotton.



Apply mask to face. The mask sets within 5-6 minutes. Leave mask to perform at least 15 minutes. Remove it by peeling off in one piece.

Price: $3.99

HM4520


Prosana Mask / Lavender & Rosemary / 1.05oz

Purpose: 1. Combine 1 ounce (30 grams) of powder with 3 ounces (90 grams) of water. (Note the water should be 68 degrees F (20 degrees C).

2. Stir vigorously for one minute until you get a homogeneous paste.

3. Apply the paste immediately to the face, avoiding the area around the eyes. The mask should set within 5 minutes.

4. Leave the mask in place for at least 15 minutes.

5. Remove by peeling it off in one piece.

Price: $3.99

HM4527


Prosana Mask / Relax & Purify / 1.05oz

Purpose: 1. Using a rubber mixing bowl, mix 90 ml (approximately 3 oz.) of water (at 68° F) of water to 30 g (approximately 1 oz.) of powder.

2. Stir vigorously for 1 minute to create a creamy paste.

3. Apply the paste to the face immediately.

4. Leave the mask on the face for at least 15 minutes.

5. Remove the mask by peeling off in one piece.

Price: $3.99

HM4522


1-17 of 17 Items

Skip to Top of Page

Please Log In

Logging in will allow you to access all of the features and products offered exclusively to Spa & Wellness Professionals such as Requesting a Catalog, Checking Out and My Account.

Don't have an Account? Create one now.

Not a Spa or Wellness Professional? Visit our consumer site.