800.558.5571 
Chat 
Fitted Massage Table Warmer
Description
This fitted table warmer features 6” skirting with elastic, a detachable cord, a 10 hour shut off timer, and a digital control with 10 heat settings. Machine washable on a delicate cycle. ETL certified for safety.Specifications
•Dimensions: 30" W x 73" L•Electrical: None
•Suggested Outlet: None
•Plumbing: None
•Warranty: 1 Year Limited
•Certifications: None
•Installed By: Universal (if setup is included with order) or Client
Wash Instructions
Wash-Do Not Dry Clean. Dry cleaning solvents will damage the warming pad wiring. Wash your warming pad, following all instructions carefully. Be sure to disconnect the control cord before washing.
Do Not
- Use bleach or dry cleaning fluids
- Twist or wring vigorously.
- Use a wringer.
- Iron mattress pad.
- Use mothballs or sprays.
- Turn mattress pad “on” until it is completely dry.
Machine Wash
- Fill washer with warm water and add minimum amount of All-purpose detergent. Agitate to dissolve detergent.
- Measure bedding before washing.
- Add bedding and soak for five (5) minutes.
- Agitate for two minutes.
- Spin.
- Fill with cool rinse and agitate for one minute.
- Spin.
Machine Dry
- Do not use commercial dryers or dryers at your local Laundromat.
- Dry warmer in automatic dryer on high heat for five minutes only.
- Remove warmer while still damp and gently block to original size and drape to finish drying.
- Do not iron your bedding.
Hand Wash
- Wash in mild, soapy water.
- Squeeze soapsuds through a few times.
- Rinse in fresh water.
Line Dry
- Do not use clothes pins.
- Air-dry over two parallel lines.
- Warmer may be hung over a shower rod if parallel lines are not available.
- Gently stretch to original size
Description
This fitted table warmer features 6” skirting with elastic, a detachable cord, a 10 hour shut off timer, and a digital control with 10 heat settings. Machine washable on a delicate cycle. ETL certified for safety.Specifications
•Dimensions: 30" W x 73" L•Electrical: None
•Suggested Outlet: None
•Plumbing: None
•Warranty: 1 Year Limited
•Certifications: None
•Installed By: Universal (if setup is included with order) or Client
Wash Instructions
Wash-Do Not Dry Clean. Dry cleaning solvents will damage the warming pad wiring. Wash your warming pad, following all instructions carefully. Be sure to disconnect the control cord before washing.
Do Not
- Use bleach or dry cleaning fluids
- Twist or wring vigorously.
- Use a wringer.
- Iron mattress pad.
- Use mothballs or sprays.
- Turn mattress pad “on” until it is completely dry.
Machine Wash
- Fill washer with warm water and add minimum amount of All-purpose detergent. Agitate to dissolve detergent.
- Measure bedding before washing.
- Add bedding and soak for five (5) minutes.
- Agitate for two minutes.
- Spin.
- Fill with cool rinse and agitate for one minute.
- Spin.
Machine Dry
- Do not use commercial dryers or dryers at your local Laundromat.
- Dry warmer in automatic dryer on high heat for five minutes only.
- Remove warmer while still damp and gently block to original size and drape to finish drying.
- Do not iron your bedding.
Hand Wash
- Wash in mild, soapy water.
- Squeeze soapsuds through a few times.
- Rinse in fresh water.
Line Dry
- Do not use clothes pins.
- Air-dry over two parallel lines.
- Warmer may be hung over a shower rod if parallel lines are not available.
- Gently stretch to original size
Documents
Related Products
