Description
Using a SpaPro Massage Stone Heater is the fast, easy way for warming stones for massage therapy. The attractive, professional stainless steel exterior provides a great amount of durability, and the removable porcelain coated steel reservoir makes cleaning easy. The adjustable thermostat has settings for a quick pre-heat or operating temperature. It can be turned as low as 100º F and as high as 210º F, with water in the reservoir. The operating range of the dial graphics heats from 110º F up to 160º F. The use of a thermometer is recommended. UL® Listed. Weight: 9.75 lbs. Note: When the unit is turned on initially, it may smoke. This is a normal part of curing the heating element and after the first two or three uses will not occur again during normal use. The bottom of the pans are typically coated with a thin sealant. Take the heater and pan outside...fill the bottom of the pan with a 1/4” of water...and let it run for at least 2-3 hours. Do not place the lid on the stone heater. This will burn off the sealant without creating too much smoke ...and minimizing the smell. Never...turn on the pan to let it cure without water in the pan. Depending on the size of stones used, this stone warmer will hold approximately 25-35 stones.
Purpose and Benefits
Note: When the unit is turned on initially, it may smoke. This is a normal part of curing the heating element and after the first two or three uses will not occur again during normal use. The bottom of the pans are typically coated with a thin sealant. Take the heater and pan outside...fill the bottom of the pan with a 1/4" of water...and let it run for at least 2-3 hours. Do not place the lid on the stone heater. This will burn off the sealant without creating too much smoke ...and minimizing the smell. Never...turn on the pan to let it cure without water in the pan.
Specifications
•Dimensions: 24”L x 15.5”W x 13.25” H
•Electrical: 230V; 6.47/6.19 Amps
•Suggested Outlet: 2 Prong W/ Ground
•Warranty: 1 Year
•Certifications: 230V Not UL® Listed
