Brow Lamination Treatment

Menu Description:

An optimal treatment for unruly eyebrows lacking symmetry, brow lamination gives the appearance of full, perfectly shaped eyebrows. After the service, your brows will look more voluminous, sleek, and defined for approximately 6 weeks.

Download this protocol.

Cost Per Treatment: $11.50
Time: 45-60 minutes
What to Charge: $75.00

Always check with your local state regulations to ensure that you're practicing within the scope of your license.

• Intensive Brow Lamination Kit / LT109

• Plastic Wrap
• Cotton Swaps / CX026T
• Cotton Rounds / CX014T
• 4x4 Esthetic Wipes / CX020T

Replacement products and supplies are available through Universal Companies.

Precautions:

• The Intensive Brow Lamination products are for licensed professional use only.
• These treatments should never be done on any person with an eye disorder or infection.
• Keep all products out of reach of children.
• Eyebrows differ from person to person and processing time should be adjusted to individual brow conditions.
• For hygiene and safety reasons, wear gloves throughout the procedure and use disposable applicators whenever possible.
• Always keep the Waving Lotion, Neutralizer, Lash Food Lotion, Tints, and Developer in a cool, dark place. Avoid direct sunlight. If room temperature reaches 83˚ F or above, relocate products to a refrigerator.
• Use products prior to expiration dates.

Client Contraindications:

• Pregnant or breastfeeding
• Using any vitamin A (Retinol) or hydrocortisone products – Do not use for 3 days prior or post-treatment
• Psoriasis/eczema – If in the treated area
• Alopecia
• Moles in the treatment area
• Recent permanent makeup – Recommend to consult with the service provider of the permanent makeup prior to proceeding
• Sunburn on or around the brow area
• Ultra-sensitive skin
• Recent anti-wrinkle injections or fillers – Not suitable for treatment.
• Medications: blood thinning, antibiotics – Recommend consulting with prescriber and waiting at least 2 weeks
• Brow growth serums
• Eyelift – Recommend letter from physician prior to proceeding
• Recent use of self-tanning products – Avoid use 1 week prior to treatment
• Cuts/abrasions/inflammation/swelling on the brow area
• Herpes simplex/eye infections/folliculitis
• Oral acne medication (within the last 12 months)
• Recent scar tissue
• Trichotillomania
• Blepharitis
• Haemophillia
• Cancer – Recommend letter from physician or oncologist prior to proceeding
• Waxing services should be performed 24-48 hours before or after brow lamination services

Pre-Service Patch Testing:

This product contains ingredients that may cause skin irritations and/or allergic reactions for certain individuals. A patch test is necessary prior to each application.

• 1. Using soap and water, cleanse a small area of the skin on the inner surface of the forearm
• 2. Apply a small patch of Waving Lotion to the area you have prepared for the patch test. Apply the Neutralizer, Lash Food Lotion, Lash Bond, and premixed Tint in 4 additional swatches next to the Waving Lotion
• 3. After 6 minutes, remove all of the products with a damp cloth
• 4. After 24 hours, review the skin where the patch was administered. If no irritation or inflammation is apparent, it's usually assumed that no hypersensitivity to the dye exists

• 1. Sanitize hands, put on gloves
• 2. Request the client remove their contacts or glasses if needed
• 3. Instruct your client to lie down in a comfortable position. It’s recommended to elevate their head slightly for practitioner comfort
• 4. Cleanse the brow and surrounding area using the Intensive Makeup Remover Foam on a 4x4 cotton esthetic wipe. Complete this step even if the client is not wearing makeup to remove all oils or dirt from the skin and brows. Wipe the area gently to dry completely.
• 5. Apply cotton rounds overtop of the client’s closed eyes for protection and comfort
• 6. Brush through the eyebrows thoroughly into the shape and design you wish to accomplish using a disposable mascara wand or Y-Brush. This also helps to separate the individual hairs
• 7. If necessary, use the Intensive Lash Bond with a disposable mascara wand sparingly on the brows to hold the shape desired.Remember to comb the bond through the brows and ensure that each brow strand is in the position desired
• 8. Massage the Intensive Cream 1 Waving Lotion sachet and open by cutting a small corner of the packet. Once open, apply a small amount to a microfiber brush
• 9. Begin applying the Intensive Cream 1 Waving Lotion onto the eyebrows carefully so not to interfere with the shape and design you have created
• 10. Fully saturate each brow hair strand beginning at the base of the brow and working towards the middle of the brow hairs. Avoid applying the solution to the tip of the brow as this can compromise the integrity of the hair and make it prone to breakage
• 11. If necessary, comb through the brows again using a disposable mascara wand or Y-Brush to ensure all hair strands are in place

• 12. Allow the Intensive Cream 1 Waving Lotion to process for 3-5minutes depending on the coarseness and thickness of the hair. Processing time should be adjusted depending on the individual’s brow condition and hair type
• a. Processing time can be determined by how thick and coarse or thin and sparse the client’s brow hair is. For brow hair that is thick and coarse, you may need to process for the full 5 minutes. For brow hair that is thin and sparse, you may onlyneed to process for 3 minutes
• b. For beginners, keeping track of your client's processing time is recommended because it impacts the neutralizing time later
• 13. Once you have thoroughly coated each brow, gently touch up the outer area surrounding the brow with a cotton swab to ensure no product is remaining on the skin. Do not rub the skin
• a. If the product comes in contact with the skin and the client feels any burning or irritation, rinse thoroughly with water immediately and discontinue the service
• 14. Apply a small strip of plastic wrap overtop of the brow carefully, ensuring the brow strands are not flattened down or moved. This will trap in the client’s natural body heat to aid with processing.
• 15. After you have allowed the Waving Lotion to process for the appropriate amount of time, remove thoroughly with a dry cotton swab beginning at inner section of the brow and working towards the outer point. To remove the product, gently roll the cotton swab from the root of the brow strand to the tip, following the direction that you placed the hair
• 16. Next, massage the Intensive Cream 2 Neutralizer solution sachet and open by cutting a small corner of the packet. Once open, apply a small amount to a microfiber brush
• 17. Fully saturate each brow hair strand beginning at the base of the brow and working towards the middle of the brow hair. Again,avoid applying the solution to the tips of the brow hair as this may compromise the integrity of the hair and cause breakage
• 18. If necessary, comb through the brows again using a disposable mascara wand or Y-Brush to ensure all hair strands are in place

• 19. Allow the Neutralizer to process for 1 minute LESS than you processed the Waving Lotion. Processing time should be adjusted depending on the individual’s brow condition and hair type
• 20. Once you have thoroughly coated each brow, gently touch up the outer area surrounding the brow with a cotton swab to ensure no product is remaining on the skin. Do not rub the skin
• a. If the product comes in contact with the skin and the client feels any burning or irritation, rinse thoroughly with water immediately and discontinue the service
• 21. Apply a small strip of plastic wrap overtop of the brow carefully, ensuring the brow strands are not flattened down or moved. This will trap in the client’s natural body heat to aid with processing
• 22. After you have allowed the Neutralizer to process for the appropriate amount of time, remove thoroughly with a dry cotton swab beginning at inner section of the brow and working towards the outer point. To remove the product, gently roll the cottonswab from the root of the brow strand to the tip, following the direction that you placed the hair
• 23. Lastly, massage the Intensive Cream 3 Lash Food Lotion sachet and open by cutting a small corner of the packet. Once open, apply a small amount to a microfiber brush and sweep over the brows to help nourish and condition

• 24. OPTIONAL: TINTING STEPS
• a. For more instruction and information, please see the Lash & Brow Tinting Protocol
• b. Ensure to patch test 24-48 hours prior to the service
• c. Brow lamination may slightly lighten the color of the hair strand. We recommend tinting after a brow lamination service to achieve a more put together and finished look.
• d. When processing tint after a brow lamination it is not necessary to leave the product on for the full 10 minutes. A 3-5 minute development time should be sufficient to achieve thedesired results.
• e. Remove the tint using a dry cotton swab or esthetic wipe, do not use water to remove the tint.

• Use the Lash Moist After Care Pen on a daily basis to nourish the brows in between services
• Be gentle with your brows for the first 24 hours following the brow lamination service
• Do not rub your brows for 24 hours
• Avoid heat or heat services for 24 hours following the service
• Do not get your brows wet for 24 hours (i.e. no showering, washing your face, swimming, etc.)
• Do not use eye makeup for at least 24 hours following the lash lift service
• Do not use oils on the brows as this will cause service breakdown (brows will not hold the desired shape)
• Do not use harsh products or oil-based makeup removers, as this can cause service breakdown