800.558.5571 
Chat 
dpl Wrist Wrap Light Therapy Pain Relief
The dpl® Wrist Wrap Pain Relief system is intended for the relaxation of muscles and relief of muscle spasms, providing temporary relief for minor muscle and joint aches, and increasing local blood circulation. Fits any size hand for comfortable, quick pain relief. FSA & HSA approved.
Features & Benefits
Wrist Wrap:
Professional-grade LED lights reach deep into joints and soft tissue
Relieves pain and stiffness
Increases blood circulation
Accelerates healing, repairs tissue, and relaxes muscles
Enhances recovery from exercise or injury
Powerful, natural pain relief Cordless to allow mobility Battery Operated
Safe for all skin tones
Professional-Grade LEDs:
880nm Infrared
660nm Red
Note: You will only see the red LEDs light up when the device is turned on. The other LEDs are in the infrared light spectrum and cannot be seen with the human eye. Please know that if you see red lights while the device is turned on, the device is working (pattern of lights may vary).
Operating Instructions
Fully charge device (2-4 hours).Your device may have a residual charge from the factory out of the box, indicated by a solid blue charging light when you turn it on. For best results, fully deplete this charge before plugging your device in.
Your device will require 2-4 hours to fully charge each time. The red indicator light will turn solid (no longer blinking) when charging is complete. A full charge will provide 2 to 3 full 20-minute treatments.
DO NOT recharge battery after each 20-minute treatment. For best results, you should fully deplete the battery before recharging. Failure to do so will progressively shorten battery life.
Battery charge will diminish over time. For best results, conduct treatments within 48 hours of charging.
1. Wash and dry treatment area prior to use.
2. Place device on wrist directly on skin and secure straps.
3. Press the power button to start the device (may require double press). Device must be unplugged to turn on, it will not turn on while plugged in. A blue light on the battery pack will show when the device is turned on.
4. Leave device over the treatment area for 15-20 minutes.
5. The device is equipped with an auto shut-off function at 20 minutes.
6. Press the power button at any time prior to auto shut off to stop the device.
7. Device may be used multiple times per day. Do not exceed 3 treatments per day, per treatment area.
Troubleshooting
Device not turning on:
Is the device fully charged?
Is the power button turned on? A blue light on the battery pack will show when the device is turned on.
Device is not charging:
Is USB charging cord firmly inserted into device? (Does power indicator light turn on?)
Try different wall outlet to confirm power is available.
Device shuts off abruptly prior to completion of 20-minute treatment:
Device is designed to shut off automatically after 20 minutes.
Device may shut off automatically after multiple repeated uses if the device exceeds desired temperature. Allow device to cool for several minutes and try again.
Some lights appear not to be on:
The Infrared (IR) light spectrum is not visible to the human eye. These lights will look as if they are not on but are operating properly. If red lights are on, the device is operating as designed.
The dpl® Wrist Wrap Pain Relief system is intended for the relaxation of muscles and relief of muscle spasms, providing temporary relief for minor muscle and joint aches, and increasing local blood circulation. Fits any size hand for comfortable, quick pain relief. FSA & HSA approved.
Features & Benefits
Wrist Wrap:
Professional-grade LED lights reach deep into joints and soft tissue
Relieves pain and stiffness
Increases blood circulation
Accelerates healing, repairs tissue, and relaxes muscles
Enhances recovery from exercise or injury
Powerful, natural pain relief Cordless to allow mobility Battery Operated
Safe for all skin tones
Professional-Grade LEDs:
880nm Infrared
660nm Red
Note: You will only see the red LEDs light up when the device is turned on. The other LEDs are in the infrared light spectrum and cannot be seen with the human eye. Please know that if you see red lights while the device is turned on, the device is working (pattern of lights may vary).
Operating Instructions
Fully charge device (2-4 hours).Your device may have a residual charge from the factory out of the box, indicated by a solid blue charging light when you turn it on. For best results, fully deplete this charge before plugging your device in.
Your device will require 2-4 hours to fully charge each time. The red indicator light will turn solid (no longer blinking) when charging is complete. A full charge will provide 2 to 3 full 20-minute treatments.
DO NOT recharge battery after each 20-minute treatment. For best results, you should fully deplete the battery before recharging. Failure to do so will progressively shorten battery life.
Battery charge will diminish over time. For best results, conduct treatments within 48 hours of charging.
1. Wash and dry treatment area prior to use.
2. Place device on wrist directly on skin and secure straps.
3. Press the power button to start the device (may require double press). Device must be unplugged to turn on, it will not turn on while plugged in. A blue light on the battery pack will show when the device is turned on.
4. Leave device over the treatment area for 15-20 minutes.
5. The device is equipped with an auto shut-off function at 20 minutes.
6. Press the power button at any time prior to auto shut off to stop the device.
7. Device may be used multiple times per day. Do not exceed 3 treatments per day, per treatment area.
Troubleshooting
Device not turning on:
Is the device fully charged?
Is the power button turned on? A blue light on the battery pack will show when the device is turned on.
Device is not charging:
Is USB charging cord firmly inserted into device? (Does power indicator light turn on?)
Try different wall outlet to confirm power is available.
Device shuts off abruptly prior to completion of 20-minute treatment:
Device is designed to shut off automatically after 20 minutes.
Device may shut off automatically after multiple repeated uses if the device exceeds desired temperature. Allow device to cool for several minutes and try again.
Some lights appear not to be on:
The Infrared (IR) light spectrum is not visible to the human eye. These lights will look as if they are not on but are operating properly. If red lights are on, the device is operating as designed.
